Diesel generators and backup sources
Emission measurements from diesel generators and backup sources
We measure emissions from diesel generators and backup sources and first verify with you whether and to what extent a measurement applies to your source.
- Obligation verified from the permit
- NOx, CO and particulates
- Authorised person and ISPOP

Accredited laboratory No. 1599
View the documentsMeasurements
From permit and operating hours to measurement
When a backup source is measured
A diesel generator is a reciprocating combustion engine, and what matters is its rated thermal input in the fuel, not the electrical output on the generator plate.
How the measurement works
If measurement applies to the source, we verify the stack and the measured substances from the permit; typically NOx, CO and particulates.
Service details
When a backup source is measured
A diesel generator is a reciprocating combustion engine, and what matters is its rated thermal input in the fuel, not the electrical output on the generator plate. From a total input of 0.3 MW it is a listed stationary source; for several related units the inputs are assessed together.
For a genuine backup source operated fewer than 300 hours per year and without special limits in the permit, no obligation to determine the pollution level may arise at all. At higher hours it may be determined by calculation, and for a source that is no longer genuinely backup, measurement may be required; we will verify your case from the permit and the record of operating hours.
How the measurement works
If measurement applies to the source, we verify the stack and the measured substances from the permit; typically NOx, CO and particulates. Measurement is carried out under stable operation with a representative load, and values from start-up and shutdown are not included in the results.
One-off emission measurements are carried out by an authorised person. The operator announces the date in ISPOP at least 5 working days before the measurement, and the protocol data are reported through ISPOP within 60 days.
Scope and deliverables
We measure emissions from diesel generators and backup sources and first verify with you whether and to what extent a measurement applies to your source. One-off measurements are carried out by an authorised person and the date is announced in ISPOP.
What we measure within our accreditation
Within our accreditation we measure solid particulate matter (TZL) isokinetically, NOx, CO, SO₂ and O₂ with analysers, TOC and VOC, HCl and inorganic chlorine compounds, heavy metals (As, Be, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Se, Sn, Te, Tl, V, Zn, Al, Fe, Si, Hg) and gas moisture, velocity and volume flow. The specific scope is determined by the permit for your operation.
We use the same procedure for other sources: boiler plants, paint shops, dryers, biogas plants, diesel generator sets, wood-processing plants, electroplating shops and other technologies. You will find the overview under Facilities and technologies.
Price, timing and scope of measurement
Price and quote
The price depends on the number of sources and substances measured, the difficulty of the measuring points and the distance. Send us your documents and we will prepare a non-binding quote. We will get back to you within 24 hours.
Date and report
We agree the measurement date according to your operation and the authority's requirement. The delivery date of the report will be stated in the quote.
What determines the scope
The scope and frequency of measurement are not set by us, but by the operating permit, the authority's decision or a request from the hygiene station (KHS) or the Czech Environmental Inspectorate (ČIŽP). Send them to us and we will verify exactly what is required of you.
How a project works
Review of documents
We review your documents, authority requirements and propose the best approach.
Scope and schedule
We clarify the scope of measurements, studies or documentation and plan timing.
Measurements and processing
We carry out measurements, calculations or document preparation as agreed.
Expert deliverable
We deliver a report, study or documentation ready for the next permitting step.
Frequently asked questions
Must emissions of a backup diesel generator be measured?
It depends on the operating hours, the classification of the source and the operating permit. According to the 2025 opinion of the Czech Ministry of the Environment (MŽP), a genuine backup source operated fewer than 300 hours per year and without special limits in the permit may have no obligation to determine the pollution level by measurement or calculation; we will verify this from your documents.
How is the 0.3 MW threshold assessed?
By the rated thermal input in the fuel, not by the electrical output of the generator. For several units that are technically or operationally linked, their total input is assessed.
Do tests count towards operating hours?
Usually yes: besides emergency runs during an outage, regular tests, service trials and test operation are included. Track the thresholds of 300 hours per year and 500 hours as a three-year moving average from an operating log or a control-system record.
Must the backup character of the source be stated in the operating permit?
According to the MŽP opinion, the fact that the source serves as a backup energy source should be stated in the operating permit; a label in the project is not enough. If it is missing, you cannot automatically assume that the backup source regime applies.
How much does emission measurement cost?
The price depends on the number of sources and substances measured, the measuring points and the distance. After receiving your documents we will prepare a non-binding quote.
How soon will I receive the report?
The delivery date of the report will be stated in the quote according to the scope of measurement. Data from the report are notified to ISPOP within 60 days using form F_OVZ_JME.
Do you measure throughout the Czech Republic?
Yes. We carry out on-site measurement of emissions, the working environment, noise and other quantities throughout the Czech Republic. We have offices in České Budějovice, Prague 5 and Havlíčkův Brod.
Legal and methodological sources
- Act No. 201/2012 Coll., on Air Protection
Current wording in the e-Sbírka collection of laws, in particular the rules for one-off emission measurements.
- Decree No. 415/2012 Coll.
Requirements for determining emission levels and carrying out measurements.
- ISPOP: forms for one-off emission measurements
Official information on notifying the measurement date and the protocol data.
- MŽP opinion on permitting backup energy sources (2025)
Interpretation of how the pollution level is determined, the thresholds of 300 and 500 operating hours and stating the backup regime in the operating permit.
