Czech Environmental Inspectorate and regional authority
Supporting documentation for the Czech Environmental Inspectorate and regional authority
We provide emission measurements, expert reports, dispersion studies or operating rules as supporting documentation for the Czech Environmental Inspectorate, regional authority or administrative proceedings on operating permits.
- Emission measurements
- Expert report and dispersion study
- Link to ISPOP

Accredited laboratory No. 1599
View the documentsMeasurements
From an authority notice to the right document
Which document serves which purpose
A one-off emission measurement is carried out by an authorised person and shows the actual emissions of a source.
Link to ISPOP
We prepare outputs so they are usable in communication with authorities — including ISPOP and annual emission reporting where needed.
Service details
Which document serves which purpose
A one-off emission measurement is carried out by an authorised person and shows the actual emissions of a source. A dispersion study models the source's contribution to immission loads, an expert report summarises the technical aspects of the source and operating rules govern its operation.
We link the work to the operating permit, inspection notice or technology change and select the document that the authority actually requires.
Link to ISPOP
We prepare outputs so they are usable in communication with authorities — including ISPOP and annual emission reporting where needed. The operator announces the measurement date at least 5 working days in advance and the protocol data are reported within 60 days.
Scope and deliverables
We provide emission measurements, expert reports, dispersion studies or operating rules as supporting documentation for the Czech Environmental Inspectorate, regional authority or administrative proceedings on operating permits.
What we measure within our accreditation
Within our accreditation we measure solid particulate matter (TZL) isokinetically, NOx, CO, SO₂ and O₂ with analysers, TOC and VOC, HCl and inorganic chlorine compounds, heavy metals (As, Be, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Se, Sn, Te, Tl, V, Zn, Al, Fe, Si, Hg) and gas moisture, velocity and volume flow. The specific scope is determined by the permit for your operation.
We use the same procedure for other sources: boiler plants, paint shops, dryers, biogas plants, diesel generator sets, wood-processing plants, electroplating shops and other technologies. You will find the overview under Facilities and technologies.
Price, timing and scope of measurement
Price and quote
The price depends on the number of sources and substances measured, the difficulty of the measuring points and the distance. Send us your documents and we will prepare a non-binding quote. We will get back to you within 24 hours.
Date and report
We agree the measurement date according to your operation and the authority's requirement. The delivery date of the report will be stated in the quote.
What determines the scope
The scope and frequency of measurement are not set by us, but by the operating permit, the authority's decision or a request from the hygiene station (KHS) or the Czech Environmental Inspectorate (ČIŽP). Send them to us and we will verify exactly what is required of you.
How a project works
Review of documents
We review your documents, authority requirements and propose the best approach.
Scope and schedule
We clarify the scope of measurements, studies or documentation and plan timing.
Measurements and processing
We carry out measurements, calculations or document preparation as agreed.
Expert deliverable
We deliver a report, study or documentation ready for the next permitting step.
Frequently asked questions
Which document does the Inspectorate or regional authority require?
It is set by the authority's notice or decision. Most often it is a report from an authorised emission measurement, an expert report, a dispersion study or operating rules. Send us the notice and we will select the right document.
Who may measure emissions for an authority?
Under the Air Protection Act, a one-off emission measurement may only be carried out by an authorised person. Before ordering, verify the scope of authorisation and accredited methods.
How is a measurement notified in ISPOP?
The operator announces the measurement date at least 5 working days in advance, and the protocol data are reported through ISPOP within 60 days.
Legal and methodological sources
- Act No. 201/2012 Coll., on Air Protection
Current wording in the e-Sbírka collection of laws, in particular the rules for one-off emission measurements.
- Decree No. 415/2012 Coll.
Requirements for determining emission levels and carrying out measurements.
- ISPOP: forms for one-off emission measurements
Official information on notifying the measurement date and the protocol data.
